Skip to content

Solar repair. When production drops.

Inverter replacement, microinverter swap, monitoring faults, string voltage drop, panel-level diagnostics. We work on Enphase, SolarEdge, SMA, Fronius, and most pre-2015 string inverters. Most repairs are a single visit.

TN LicensedAll Brands · String + MicroinverterPermits handled
Service Overview

Daily production tanked? It is fixable.

A solar system that produced 38 kWh on a sunny June day in 2022 should still produce 38 kWh in 2026. If it does not, something is broken — usually one specific thing, and usually fixable on a single visit. Most installers will not service systems they did not install. We do.

The four most common solar failures we see in East Tennessee: (1) a string inverter that has aged out and needs replacement at the 10-12 year mark, (2) a failed microinverter on one or two panels showing up as zero production on the monitoring app, (3) a tripped DC disconnect or AGI from a lightning event, and (4) monitoring system disconnected from the home Wi-Fi after a router replacement.

We start with the monitoring data. Enphase Enlighten, SolarEdge mySolarEdge, SMA Sunny Portal, and Fronius Solar.Web all log per-panel or per-string production going back years. Comparing this week against the same week three years ago narrows the cause to a specific panel, inverter, breaker, or interconnect before we put a ladder on the roof.

For inverters past warranty, we quote replacement with a same-brand drop-in or a brand-agnostic alternative. For microinverter swaps, we replace only the failed unit unless we’re seeing pattern failures across the same vintage. Most single-issue repairs are a half-day or a day on site.

Typical scope
Inverter replacement · microinverter swap · monitoring fault · string diagnostics
Typical timeline
Half-day to 1 day typical · multi-day for full inverter replacement
Typical price
$200+ diagnostic · $1,800-$3,500 inverter swap
Permit
Pulled when required (like-for-like swaps usually exempt)
Inspection
Coordinated when required
Warranty
2 years labor · pass-through manufacturer warranty on replacement parts
What’s Included

Solar repairs we see weekly.

Monitoring data diagnosis

We pull your historical production data first. Enphase, SolarEdge, SMA, Fronius — the platform tells us which panel, inverter, or string is the issue before we climb anything.

String inverter replacement

Most string inverters age out at 10-12 years. We do same-brand drop-in replacements (SolarEdge HD-Wave for SolarEdge, SMA Sunny Boy for SMA) or brand-agnostic alternatives if your platform is being discontinued.

Microinverter swap

Enphase microinverter replacement, single-panel or batch. We swap the bad unit, re-register on Enlighten, and verify production by panel before leaving.

Monitoring reconnection

Wi-Fi changes, router swaps, and ISP changes routinely disconnect solar monitoring. We get you reconnected to Enlighten, mySolarEdge, etc., and verify the data flow.

DC disconnect + AGI diagnostics

Lightning, GFCI faults, and worn DC disconnects all show up as system shutoff. We trace the path from panels through combiner to inverter, find the open, and restore production.

Out-of-business installer rescue

Bought a system from an installer who is no longer operating? We pick it up. Most modern hardware is interoperable enough to service even when the original company is gone.

Recent Solar repair Work

Field log.

String inverter replacement · 10-year unit
Solar
String inverter replacement · 10-year unit
Combiner + disconnect troubleshooting
Diagnostic
Combiner + disconnect troubleshooting
Solar load-side panel inspection
Tie-in
Solar load-side panel inspection
Production meter + utility disconnect
Interconnect
Production meter + utility disconnect
Service Map · 100mi Radius

Where we install this.

Same-day truck rolls across the East Tennessee corridor. Sevier, Knox, Blount, Jefferson, and Cocke counties primarily.

How We Run This Job

Five steps. No surprise invoices.

Step 01

Text or call us first

Describe the job. We follow up with a phone chat to scope it, then we send your quote. Same-day for most residential.

Step 02

On-site walk-through

For larger jobs, we come out, look at the panel, and talk through what you actually want. Free. No “let me get back to you.”

Step 03

Itemized estimate

Every line item priced. Materials, labor, permit, inspection. You see exactly where the dollars go before you sign anything.

Step 04

Job day · permits handled

We pull permits, coordinate with the county inspector, and arrive when we said we would. We protect your floors. We label every breaker. We test every circuit before we leave.

Step 05

Inspection & sign-off

Inspector signs off, we walk you through what changed, we hand over the documentation. If anything ever flickers, you have our cell.

Customer Log · Voice Drop
Solar inverter replacement service in East Tennessee

Our SolarEdge inverter died at year 11. The original installer closed down years ago. Volt Pro pulled the historical data, confirmed the inverter, and had a replacement in and producing two days later. Most installers refused to even quote it.

Greg N. · Knoxville · SolarEdge HD-Wave replacement · March 2026
Common Questions

Five things we get asked every week.

My solar production dropped — what could it be?
Most common: a failed microinverter (one or two panels stop producing), an aged-out string inverter (10-12 year typical lifespan), a tripped DC disconnect from lightning or surge, or the monitoring system disconnected from Wi-Fi after a router change. We start with the monitoring data to narrow it before we climb anything.
My original solar installer is out of business — can you still service it?
Yes. Most modern solar hardware is interoperable enough to service regardless of who installed it. We work on Enphase, SolarEdge, SMA, Fronius, and most pre-2015 string inverters. We register on the manufacturer monitoring platforms even if you no longer have the original installer login.
How much does a solar inverter replacement cost?
For a typical 6-10kW residential string inverter, $1,800 to $3,500 installed including hardware, labor, and permit. Microinverter swaps are $300-$500 per unit installed. Diagnostic-only visits are $200 if you want us to confirm the issue before committing to repair.
Is my solar warranty still good?
Panel warranties are typically 25 years; string inverters 10-12 years; microinverters 25 years. If your hardware is in warranty, we file the warranty claim with the manufacturer and only charge labor. Out-of-warranty replacement gets a full quote.
Can you reconnect my solar monitoring after I changed routers?
Yes. This is one of our most common solar visits — ISPs and routers change, the monitoring gateway loses Wi-Fi, and production data stops uploading even though the system is still producing. Half-hour fix typically.
Now booking · East Tennessee

Production down? Let us check.

On-site walk-through within the week. Itemized estimate before any work starts.